MYIRO-1 ESSENTIAL
Innovative, User-Friendly & Accurate
INSTRUMENT HIGHLIGHTS
Spot & Scan
Scan an entire profiling chart in minutes or take just a single spot measurement. MYIRO-1 uses a precise spectral engine and delivers accurate color measurements every time.
WLAN Connectivity
Wireless connectivity greatly improves the handling. Measure printed charts where it is convenient and comfortable for you and leave the stress behind.
M0, M1, & M2 in one Scan
A single scan can provide measurement data under M0, M1, & M2 measurement conditions to ensure efficiency.
Bi-directional Scanning
Time is cut in half with intelligent and automatic bi-directional scanning of test charts.
Use with 3rd Party RIPs and Software
MYIRO-1 is supported by a growing list of software providers in the industry. See the complete list in the ‘supported 3rd party software’ tab below.
SOFTWARE HIGHLIGHTS
Unlimited Display Profiling
MYIRO-1 includes a software site license allowing you to calibrate and profile every computer display at your facility.
Trust Your Softproof
Create highly accurate ICC display profiles and learn to trust the color on your display for enhanced softproofing.

“Specifically with the new Fiery Verifier. Everything worked very well. From the handling point of view it is the most comfortable instrument I have.” Dr. Jurgen Krüger,
Krügercolor

“The biggest surprise was the color rendering of the MYIRO Profile compared to the market leader. The quality of the photo prints based on the MYIRO Profile were simply much better in terms of vividness, contrast, everything.” Stefan Steib, Photographer and Journalist

“The price performance ratio for hardware and software is absolutely impressive.” Ronny Willfahrt, PrintXMedia Consult

 MYIRO-1
Essential
MYIRO-1
Profiling
MYIRO-1
Advanced Profiling
ICC DISPLAY PROFILING   
Includes site license of basICColor display 6 for unlimited use with MYIRO-1
Use pre-defined workflows to get started quickly & easily
Customize workflow settings to suit your needs (white point, luminance, etc.)
Calibrate internal LUTs (in supported displays) for precise luminance, black point, color temperature, and gray balance
Validate profiles automatically after creation to ensure accurate results
Check ambient light and viewing booths for conformity to industry standards
Control and automatically set the luminance of compatible viewing booths to match the display luminance for optimum soft-proofing results
Generate 3D LUT calibrations (in supported displays) to emulate any gamut and allow for color correct viewing even with non-ICC-color-managed workflows like digital video, web design, and even medical viewers
MEASURE, VIEW & ANALYZE   
Measure color swatches or single spots to check CIELab, CIELCh, density, and more
Measure printed color control strips (Idealliance, G7 P2P51, FOGRA MediaWedge, etc.)
Measure printed ICC color profiling charts (IT87/4, TC1617, GMG, MYIRO, etc.)
View measurements in chart, column, and patch modes
Save & Export CGATS measurement data files
Automatically Analyze measurement data sets and see PASS/FAIL results:
-Easy Compare – Compares 2 data sets and shows avg. ∆E, max ∆E, and substrate ∆E
-Validation Print - Uses ISO 12647-8 criteria to compare a press sheet/proof print to a reference print condition (or any 2 data sets to each other) 
-Contract Proof - Uses ISO 12647-7 criteria to compare a press sheet/proof print to a reference print condition (or any 2 data sets to each other) 
-G7 - Uses G7 criteria to compare a press sheet/proof print to a reference printing condition - Coming Soon 
-Solid Densities – Choose data set and see your average process solid ink densities 
Save custom references as presets  
Use custom tolerances  
ICC PRINTER PROFILING   
Create RGB printer profiles with pre-defined settings 
Create CMYK printer profiles with pre-defined settings 
Create DeviceLink profiles for CMYK printers with pre-defined settings 
Control & customize RGB & CMYK device profiles settings:  
-Black Generation  
-Gamut Mapping  
-OBA correction  
Customize settings for DeviceLink profiles:  
-Re-calculate Black Generation  
-Gamut Mapping  
-Define rules/exceptions for specific input source color values so they are not changed on the output device  
VENDOR SOFTWARE
AgfaApogee Prepress 12
AgfaColorTune 12
AgfaAsanti 5
basICColorDisplay/Display Pro
BodonipressSign
CGSColorTuner
CGSFlexPack
CGSPressMatcher
CGSX Gamut
CGSCertified
ColorGATEProductionServer
ColorlogicMeasuretool (CoPrA, ZePrA, ColorAnt)
ColorwareMeasureColor
CorayeCoraye
CreoColorServers
EFIColor Verifier
EFIColor Profiler Suite
EFIFiery XF
EFIColor Verifier
ErgosoftErgosoft 16
IneditNeoStampa
Konica MinoltaIJ Manager (KM-1)
Konica MinoltaAccurioPro CloudEye
MellowcolorMellowcolor
Illumination/viewing system45°a:0° (annular illumination)*1
Spectral separation deviceConcave grating
Wavelength rangeSpectral reflectance: 380 to 730 nm
Spectral irradiance: 360 to 730 nm
Wavelength pitch10 nm
Half bandwidthappr. 10 nm
Measurement areaø 3.5 mm
Light sourceLED
Measurement rangeReflectance: 0 to 150% / Density: 0.0 D to 2.5D
RepeatabilityColorimetric: Within 𝞼∆E00 0.05
(When white calibration plate is measured 30 times in 10-second intervals after white calibration has been performed)
Inter-instrument agreementWithin ∆E00 0.3
(Average of 12 BCRA Series II color tiles compared to values measured with a master body under manufacturer's standard conditions)
Measurement timeApproximately 1 second (single-point)
Measurement conditions *2M0, M1, M2, User-defined illuminant
Observers2° Standard Observer, 10° Standard Observer
Status indicatorLED to indicate instruments status
InterfaceWireless LAN (802.11 b/g/n); USB 2.0
Scanning measurementsScanning of color charts under all measurement conditions in one single scan
PowerUSB bus power; Rechargeable internal battery
Dimensions (WxDxH)73 mm x 171 mm x 71 mm
Operating temperature/humidity range10° to 35°C, 30% to 85% relative humidity with no condensation
Storage temperature/humidity range0° to 45°C, 0% to 85% relative humidity with no condensation
*1Illumination for wavelengths under 400 nm is unidirectional
*2M0, M1, M2: Illumination conditions defined in ISO 13655